Electroplating equipment How should we manage daily?
The cathode conductive device in the drum of electroplating equipment passes through the central shaft holes on both sides of the drum through copper wires or bars, and is respectively fixed on the conductive frame of the left and right wall plates of the drum. The gravity of the parts in the drum is naturally connected with the cathode conductive device. The barrel plating of small parts is related to many factors such as the structure, size, size, rotating speed, conductive mode and opening ratio of the drum. Cylinder is one of the key points of the whole barrel plating technology research. Barrel plating refers to that when small parts are rolled in the process of continuous rolling, the small parts are not stationary in the roller, but roll continuously with the rotation of the roller. This rolling is specific to a certain part, which is buried inside the whole stacked part and turned to the outside surface. This continues until the end of the barrel plating process.
The production of electroplating equipment technology not only makes metal materials resistant to corrosion, but also is widely used in agricultural and animal husbandry, industrial production, high-tech, transportation and tourism, electronic equipment and other manufacturing industries and the scientific research and processing technology of daily necessities. Plastic products are more durable, making the surface of the handicraft more beautiful. Electroplating technology products have this high-quality characteristic, which can be used around people, Electroplating products are almost common. Goods with good electroplating process shall have smooth and smooth surface, symmetrical and fine surface, and shall not fade, rust or fall off in application. In order to improve the characteristics and aesthetic level of products with electroplating technology, preservatives must be added to improve the glossiness of products when developing electroplating technology.
1. Bath pH management
The pH value of the plating solution is a relatively hidden fluctuation factor, which is often found when problems occur. Therefore, it is absolutely necessary to frequently detect the pH value of the plating solution. For more demanding plating, use a digital pH display controlled by a sensor. In this way, the pH value of the plating solution can be known in time. A simple way is to use precision test paper to measure on site. Make test paper available to operators. Don't have test paper only for craftsmen. This can ensure that the pH value of the bath is monitored by more people.
2. Temperature management
The temperature management is not limited to the plating tank, but also the hot water washing temperature. Many electroplating enterprises only pay attention to the temperature control of the electroplating tank, no matter whether the hot water is heated insufficiently or excessively, which is not conducive to quality and wastes resources. The influence of temperature on electroplating has been introduced in detail. Temperature has an important influence on the surface quality and efficiency of electroplating. Therefore, all plating seeds that need to be heated should be equipped with thermostatically controlled heating equipment, and employees are required to record the temperature of the plating solution. Of course, from the perspective of energy conservation, the process at room temperature should be used as far as possible. However, some plating seeds can only work at a certain high temperature at present. The key is to strengthen management to prevent waste of energy and evaporation of plating solution caused by overheating.
