With the rapid economic development, environmental problems are also a very serious problem, so we can't just focus on economic development and ignore the problem of environmental damage. Previously, we didn't know much about the problems brought about by industrial development, but from the emergence of haze, acid rain and other problems, We gradually found that the environment has become much worse than before, so now we need to take preventive measures, and we must not let the global environmental crisis break out. Next, let's introduce the environment-friendly electroplating hanging tool process, see its relevant process parameters and maintenance, and let's get to know it together.
Electroplating equipment Production line The production line refers to the modern equipment that carries out uninterrupted work in strict accordance with the pre established work procedures, technological processes and time requirements. You can also process parts with different thickness combinations in the same automatic line to meet the electroplating requirements of different substrates or products. The damage of electroplating equipment production line is also largely caused by improper use, of course, there are also problems of product quality and design life. However, even if the imported high-tech equipment is improperly used and managed, its life will be greatly reduced. Therefore, the management of auxiliary equipment should be strengthened just like that of main equipment, Electroplating equipment manufacturer Establish an assessment system. In case of damage within the specified service life, the causes shall be analyzed and corresponding accountability shall be carried out. In this way, the service efficiency and service life of auxiliary equipment can be improved, thus improving the overall level of electroplating production management.
1. Relevant process parameters of the whole plate electroplating hanger: the main components of the bath solution are copper sulfate and sulfuric acid. The formula of high acid and low copper is adopted to ensure the uniformity of the thickness distribution of the plate surface and the deep plating capacity for deep holes during electroplating. The sulfuric acid content is mostly 180 to 240 g/L, and the copper sulfate content is generally about 75 g/L. The bath solution can contain trace chloride ions, As an auxiliary gloss agent and a copper gloss agent, it plays a gloss effect together.
2. Process maintenance, Replenish the anode copper ball in the titanium basket in time, check whether the anode titanium basket bag is damaged every month and replace it in time, check whether there is anode mud accumulated at the bottom of the anode titanium basket, and replace the filter element of the filter pump every two weeks.
The electroplating equipment production line is a complete multi-functional automatic control system consisting of various electroplating treatment tanks, cranes, racks, electrical systems, power equipment, ventilation systems, circulating filtration systems, temperature controlled heating systems, air mixing systems, liquid level control systems, cathode moving devices, etc. according to certain process requirements. The production line is suitable for both barrel plating and hanging plating. The electroplating equipment production line adopts the straight cantilever traveling mode, and the traveling frame is provided with a lifting hook. The crane and the hook are driven by one motor respectively, and the speed of the motor is controlled by the frequency converter. The SQ and sensing piece of the proximity switch are installed at the appropriate position of the traveling crane. The sensing piece is installed on the track according to the station. The translation of the traveling crane and the up and down of the hook are from the SQ proximity sensing piece.
