Electroplating equipment manufacturer Good maintenance skills of electroplating hangers in production line Only electroplating production line equipment can ensure qualified process methods, Electroplating equipment The quality of electroplated workpieces is closely related to the quality of electroplated workpieces. Finally, high-quality electroplated workpieces are obtained. It is inevitable that some minor problems will occur in the temporary use of electroplating production line equipment. The following is the most important maintenance skill for electroplating hangers in the electroplating production line: assemble the workpiece and then assemble the workpiece. Attention should be paid to ensuring the brightness of the surface of the workpiece. First, use a knife to cut the insulation layer adhered to the joint between the electroplating hanger and the workpiece. Do not damage the workpiece to prevent scratches and deformation.
Electroplating equipment is a typical industry with high energy consumption and high pollution, but it is also an extremely important part of surface treatment. The existing technology of electroplating industry cannot be replaced, so upgrading to electroplating enterprises is a sure way to develop. At present, in order to facilitate supervision and management, some regions have built new electroplating industry concentration areas to bring together local electroplating enterprises. Faced with such a development scenario, small electroplating equipment manufacturers that could have survived in the crevice must make corresponding adjustments if they want to survive under the general trend of environmental protection.
Whether the electroplating equipment is aged, deformed or discolored, a Check whether the insulation on the hanger is damaged. Whether there is leakage, whether it can be used again, if there is no damage, it can be retained for use, if there is damage, it must be removed. In order to prevent accidents in the workshop, b do not burn the insulation on the hangers with open flame. Fire occurs. Attention should be paid to safety technology and labor maintenance: ① There should be ventilation facilities in the assembly site; ② Wear gloves during assembly. c When removing insulation. Prevent skin damage; ③ Temporary occurrence in the exhaust fan
Anti gas mask shall be worn when assembling electroplating equipment. In case of failure. The metal ions in the plating solution of the electroplating equipment deposit on the surface of the parts under the action of DC to form a uniform and dense metal coating. The necessary condition for electroplating is the additional DC power supply. Electroplating is a process of surface processing of parts by electrolytic method. When electroplating, the parts are cathodes. Electrolysis device is composed of plating solution, plating parts and anode.
Electroplating equipment, however, the high-frequency switching power supply in the 1990s used new components with high quality, stable and reliable operation, perfect self maintenance function and high automation level. If the conservative pre inspection and pre repair maintenance mode is still adopted, not only hidden dangers can not be found, but also some man-made faults will be caused due to repeated assembly. In actual work, there have been cases of damage caused by assembly. Data analysis shall be carried out regularly to print various information recorded by the computer of the switching power supply on a regular basis, so as to easily understand the historical data of the power supply itself, such as how the AC interruption occurred, when the battery was charged and discharged, and the current working state of the electroplating power supply. Through the analysis of these data, certain problems can be found. If necessary, the price of electroplating equipment can be modified in time.
