repair Electroplating equipment Method of
Electroplating equipment manufacturer's production line Electroplating pendant equipment with good maintenance skills can ensure qualified process methods, and the quality of electroplating equipment is closely related to the quality of electroplating workpiece. Z finally obtained high-quality electroplated workpieces. Some small problems will inevitably occur in the temporary use of electroplating production line equipment. The following is the main maintenance skill for electroplating pendants of electroplating production line Z: assemble workpieces, and then assemble workpieces. Attention should be paid to ensuring the appearance brightness of the workpiece. First, cut off the insulation layer at the connection between the electroplating pendant and the workpiece with a knife. Do not touch the workpiece to prevent scratches and deformation.
Electroplating equipment is a typical industry with high energy consumption and high pollution, but it is also an extremely important part of appearance treatment. The electroplating industry cannot be replaced by the existing technology, and upgrading to electroplating enterprises will certainly develop. At present, in order to facilitate supervision and management, some regions have established new electroplating industry concentration areas to gather local electroplating enterprises. In the face of such development, small electroplating equipment manufacturers must make corresponding adjustments if they want to survive in the trend of green and environmental protection.
Whether the electroplating equipment is aged, deformed and discolored, and whether the insulation on the pendant is damaged. Whether there is leakage, whether it can be reused, if there is no damage, it can be retained for use, if there is damage, it must be removed. In order to prevent accidents in the workshop, b cannot burn off the insulation on the pendant with open flame. Fire occurs. Attention should be paid to safety technology and labor maintenance: the assembly site should have ventilation facilities; ② Gloves shall be worn during assembly, and insulation shall be removed. Prevent skin damage; ③ Temporarily occurred on the exhaust fan.
When assembling the electroplating equipment, you should wear a gas mask. When a fault occurs. Under the action of direct current, the metal ions in the electroplating equipment are deposited on the surface of the parts, forming a uniform and dense metal coating. The necessary condition for electroplating is to increase DC power supply. Electroplating by the manufacturer of electroplating equipment is a process of machining the surface of parts by electrolytic method. When electroplating, the parts are cathode. The electrolytic device consists of electroplating, electroplating and anode.
Electroplating equipment but the high frequency switching power supply in the 1990s used new components with high quality, stable and reliable operation, perfect self maintenance function and high automation level. If the conservative pre inspection, pre repair and maintenance methods are still used, not only hidden dangers can not be found, but also some man-made faults will be caused by repeated assembly.
In actual work, the damage caused by assembly has occurred. Data analysis shall be carried out regularly, and various information recorded by the switching power supply computer shall be printed regularly to facilitate understanding of the historical data of the power supply itself, how to interrupt the AC, when to charge and discharge the battery, and the current working state of the electroplating power supply. Through the analysis of these data, we can find some problems. If necessary, the price of electroplating equipment can be modified in time.
