Electroplating equipment manufacturer How to maintain the equipment?
If the equipment is planned to be shut down for a long time, it should be maintained so that it will not be corroded and aged during the shutdown. Clean the ground, clean the water on the ground, keep the ground dry, and keep the machine, tank, driver, and pendant clean and dry; All motors shall be protected with fresh paper; All bearings are injected with lubricating grease for rust prevention; Clean the liquid medicine in all pipelines; Take out the filter element, clean all heaters in the tank, remove dirt and keep dry.
fast Electroplating equipment Multiple workpieces can be electroplated at the same time. In addition, stirring the liquid medium in the electroplating process can speed up the electroplating of workpieces. At the same time, stirring electroplating can filter the liquid medium from the electroplating box to remove impurities, adhere to the purity and quality of electroplating, and greatly improve the efficiency of electroplating. Efficient and fast electroplating equipment, including the electroplating box, impurity filter and agitator, is placed on the rack, and the upper end is placed with the electroplating box cover.
The contact is sealed, the upper end of the electroplating box cover is provided with a plurality of negative poles and electroplating workpieces, the lower end of the negative pole and electroplating workpieces extends to the electroplating box, the electroplating box is filled with electroplating liquid medium, the lower end of the negative pole and electroplating workpieces is immersed in liquid, the lower end of the electroplating box is provided with a row of agitators, the blade part of the agitator is in the liquid medium, and the drive part is fixed on the rack, One end of the electroplating box is provided with a pipette.
The connection between the electroplating box and the suction pipe is equipped with a one-way valve, the other end of the suction pipe is connected to the lower end of the impurity filter, the upper end of the impurity filter is connected to the suction pump, the output end of the suction pump is connected to the electroplating box through a drain, the impurity filter screen and the suction pump are placed on the pump support seat, and the pump support seat is fixed on the outside of the electroplating box.
Electroplating equipment is used in the production of printed circuit boards. Due to different production processes and manufacturers, there will be some differences in equipment. Therefore, there will be some differences in maintenance methods. However, the equipment must be properly maintained in a timely manner, not to catch up with the production progress. Production and neglect of equipment maintenance. Only correct and timely maintenance can ensure normal operation of the equipment, stable performance, and production and quality.
