上海约茶

 Product Center

Product classification

contact us

Jiangsu Jiangzhou Environmental Protection Technology Co., Ltd

Contact: Mr. Xing

Tel.: 0515-88661122

Mobile: 13705100237

Email: [email protected]

Fax: 0515-88663108

Address: No. 8, Chuangye Park, Fumin East Road, Dazonghu Town, Yandu District, Yancheng City

Website: neo4j.org.cn

Hubei PP main air duct

Hubei PP main air duct

  • Detailed introduction

 PP main air duct

  How to make and install PP main air duct?


PP main air duct is made of galvanized steel plate as the main raw material, through seaming and mechanical processing, which is easy to make on site and can be designed. It is a traditional pipe for ventilation and air conditioning. At the same time, with the development of technology, it has been changed from manual production to full mechanized production, which has the advantages of high efficiency and accurate processing size.


General provisions for the fabrication of ventilation ducts:

1. General provisions:

Before making the air duct, first check whether the materials used meet the quality requirements, and whether there are factory certificates or quality identification documents. In the absence of the above supporting documents, visual inspection shall be carried out and the following requirements shall be met:

(1) The surface of the plate should be flat, the thickness should be uniform, and there should be no convex concave and obvious crushing, and there should be no cracks, sand holes, scars, burrs and rust;

(2) The profile steel shall be uniform and uniform, free of cracks, bubbles, cavities and other defects affecting quality;

(3) Other materials shall not reduce the strength of finished products or affect their use efficiency due to defects.

2. The surface of air duct and accessories shall be flat, the arc shall be uniform, and the longitudinal joints shall be staggered; The seaming seam shall be tight and uniform in width. The welds shall be visually inspected and free of defects such as pores, sand holes, slag inclusions and cracks. The deformation of the steel plate after welding shall be corrected.

3. When making metal air ducts and fittings, the allowable deviation of outer diameter or outer edge length is - 1mm if it is less than or equal to 300mm; If it is greater than 300 mm, it is - 2 mm. The allowable deviation of the inner diameter of the circular flange or the inner dimension of the rectangular flange when making the flange is+2mm, and the unevenness shall not be greater than 2mm.

4. All right angle turns in the air duct system are equipped with silencing elbows, and galvanized iron plate deflectors are set inside the silencing elbows.


Website: //neo4j.org.cn/product/588.html

key word: PP main air duct , Price of main air duct of galvanized line , Manufacturer of main air duct of galvanized line

Recent browsing:

Related products:

Related news: