1. Process flow of high-speed electroplating line without isolated coating:<br>

Transmission steel belt on frame clamp (manual tangent feeding, flap feeding or automatic feeding of magazine) → Chemical or electrochemical degreasing → hot water spray cleaning → surface deoxidation → pure water spray → surface activation → electrotinning → pure water spray → acid-base neutralization → hot pure water spray → coating oxidation resistance treatment → hot pure water spray → blowing surface water droplets → drying in hot air duct → workpiece unloading steel strip → steel strip uncoating → steel strip drying → steel strip returning to feeding table<br>

2. Process flow of high-speed electroplating line for electroplating flexible nickel as isolation coating (preventing copper/tin molecule co permeation):<br>

Transmission steel belt on frame clamp (manual tangent feeding, copper plate feeding or automatic feeding of magazine) → Chemical or electrochemical degreasing → hot water spray cleaning → surface deoxidation → pure water spray → surface first activation → nickel sulfamate electroplating → hot pure water spray → neutralization and removal of organic adsorption film → hot pure water spray → second activation → electrolytic tin plating → pure water spray → acid-base neutralization → hot pure water spray → coating oxidation treatment → hot pure water spray → blowing surface water droplets → hot air duct drying → Workpiece unloading steel strip → steel strip deplating → steel strip drying → steel strip returning to feeding table

In vertical electroplating, in order to ensure the evenness of surface copper and the effect of hole copper during electroplating, the vibration and shaking of the plate will stop, and there will be a vibration and shaking mechanism on the tank. 30d: Stop checking the reducer to see if it can work normally and check its tightness; Check the tightness of the motor bolts of the vibration device; Check the wear condition of the vibration rubber. If the wear is serious, stop changing it in time. 180d Stop checking the contact condition of the power line in the junction box, Electroplating wastewater treatment equipment Timely tighten the loose joints, and stop changing the power lines for the condensed or aged power lines, so as to ensure the insulation between the power lines; All bearings on the vibration mechanism shall be checked once, and the last time the grease was smoothed, and the severely worn bearings shall be replaced in time.

Electroplating is an important process in the whole production process, Electroplating equipment Some single metal or alloy electroplating processes can be selected for electroplating or dip plating of parts. Electroplating equipment can effectively prevent corrosion and wear of parts. It is important that the plated and dipped parts will also be beautiful. The main advantages of electroplating equipment in use are:

1. The tire refining equipment has good economic benefits in the production and use process, and the initial design cost can be recovered in two or three years, and the waste water of used circuit boards and electroplating plants is not like the traditional waste water, but can be recycled. The recovery rate is 75% - 90%, which is very safe and convenient to use.

2. If some industrial parks or factories need to expand production, they no longer need to add wastewater treatment and discharge equipment, which saves costs, improves work efficiency, and can be used for multiple purposes. If the industrial parks have water restrictions or lack of water, they can also use this equipment for production, In addition, it can carry out a full automatic continuous system, which is also suitable for large flow wastewater.