What is? Electroplating equipment Oil treatment application of production line? below Electroplating equipment manufacturer Let's introduce

The semi-automatic line is a domestic electroplating production line with high production capacity and is the mainstream equipment of domestic electroplating production line at present. Full automatic production line Automatic electroplating production line is a combination of electroplating tank, electroplating parts lifting and conveying device, electrical control device, power supply equipment, filtering equipment, detection equipment, heating and cooling device, air mixing equipment, etc. according to certain electroplating process requirements. The whole process required by electroplating process is automatically completed through electromechanical devices, with high production efficiency and stable product quality. The automatic electroplating production line is suitable for products with single product and large output, such as aluminum alloy automobile wheel housings or bicycle rims. The automatic production line for electroplating with such products is designed according to the size and output of the products, so it is very suitable for the loading mode and relatively fixed movement rhythm of the products. The plating solution is strictly managed, and the electroplating can be continuously and automatically produced after the action program is prepared.

Generally, the main components of animal and vegetable oils are sodium stearate (soap) and glycerin produced from stearin (which belongs to saponified oil), which are easily soluble in water, so as to remove saponified oil stains on the surface of the workpiece. Emulsifier is a kind of surfactant. When the matrix material adhering to oil stains is immersed in the solution containing emulsifying agent, the emulsifying agent adsorbed on the interface between the metal and the solution has its hydrophilic group facing the solution, which reduces the tension of the interface between the metal and the solution, increases the wettability of the solution to the metal, and thus enhances the squeezing effect of the solution on the adhesion of the oil film on the material surface; At the same time, the emulsifier adsorbed on the interface between oil film and solution can reduce the interfacial tension and increase the contact area between solution and oil film. Under the action of hydrodynamic force, the oil film breaks into tiny oil droplets, which leave the surface of the matrix material and transfer to the solution to form an emulsion.