What conditions need to be met for electroplating process of electroplating equipment?

Date of issue: 2020-03-12 Author: Click:

Electroplating equipment Plating conditions:

1. There should be good adhesion between the coating and the base metal, and between the coating and the coating;

2. The coating shall be crystal, smooth and even in thickness;

3. The coating shall have the specified thickness and as few pores as possible;

Electroplating equipment.jpg

4. The coating shall have various specified indicators, such as brightness, hardness, conductivity, etc;

5. Plating time and temperature determine the size of coating thickness;

6. The ambient temperature is - 10 ℃~60 ℃;

7. The input voltage is 220V ± 22V or 380V ± 38V;

8. The maximum working noise of water treatment equipment shall not be greater than 80dB;

9. The relative humidity shall not be greater than 95%;

10. The COD content of raw water is 100mg/L~150000mg/L;

11. In the pretreatment process of plating, the main equipment used are grinding, polishing machine, brushing machine, sandblasting machine, polishing machine and various fixed grooves;

12. Electroplating is the main process in the whole production process. According to the requirements of parts, one or more single metal or alloy electroplating processes shall be selected for electroplating or immersion of parts to achieve the purpose of corrosion prevention, wear resistance and beauty;

13. Post plating treatment refers to polishing, polishing, passivation, coloring, drying, sealing, dehydrogenation and other work for parts. One or more processes shall be selected as required to make the parts meet the quality requirements.