Electroplating equipment Electroplating production mode and daily inspection requirements

Electroplating production mode of electroplating equipment

Electroplating equipment should have sufficient room for continuous development from the aspects of reasonable energy structure, resource saving and reuse. Electroplating production units should not only formulate plans from the perspective of electroplating process and environmental protection.

For example, the non discharge technology of water, namely the so-called zero discharge technology, will be basically adopted. Even if there is a drainage system, it will change the previous discharge mode that only aims to meet the discharge specifications, and it is necessary to recover all the recoverable metals in the water and the water itself.

With the progress of high-energy porous electrodes and various membrane technologies, and on the basis of making full use of clean and low-cost energy such as solar energy, the future water treatment will be a combination of metal recovery, electrical decomposition of various harmful substances, and water decomposition and regeneration (collection of oxygen and hydrogen on anode and cathode), which is by no means a scientific fantasy.

Daily inspection requirements for electroplating equipment

Daily spot inspection of electroplating equipment is the basic condition for maintaining normal operation. Since the operator's task is to use equipment for production, Electroplating equipment manufacturer Therefore, the independent spot inspection system should not be too cumbersome and time-consuming, and the technical content should not be too high. Mainly from electroplating equipment cleaning, oil lubrication, fastening abnormal sound, electrical pipeline, safety inspection, surrounding environment, operation preparation, instrumentation and other aspects.

1) Instruct the staff to use the equipment correctly and be familiar with the equipment structure principle and process operation sequence. Operate the equipment properly.

2) Have basic operation skills for actual maintenance of home care equipment and inspection equipment.

3) Arrange equipment maintenance personnel with hidden dangers according to the maintenance plan.

4) Requirements for daily spot inspection personnel of plating equipment.

5) Record the spot check results in the spot check table. Be familiar with routine check specifications and contents.

6) Regularly lubricate the lubricating parts according to the provisions of the spot check table. Be familiar with grease standards.