-
What is the working efficiency of electroplating equipment? Many people will pay attention to the working efficiency of electroplating equipment. Now an efficient rapid electroplating equipment can carry out electroplating process for many product workpieces. In the whole process of mixing liquid chemicals, promotion can speed up the product electroplating process. In addition to the liquid chemicals filtering residues from the electroplating process box, always adhere to the purity and quality of the electroplating process
Published on: June 17, 2022 Clicks: 69
-
Selection of power supply for electroplating equipment: compared with other industrial production technologies, electroplating technical machinery and equipment are not only very simple, but also have very large random strain. Taking power supply as an example, if it can produce DC power supply, it can be used as electroplating power supply, from rechargeable batteries to DC motors, from bridges to silicon rectifiers From thyristor to power switch power supply, all
Published on: November 4, 2020 Number of hits: 251
-
The electroplating wastewater treatment equipment aims at the problems of large amount of comprehensive discharge water in the electroplating industry, low concentration of harmful substances and difficult treatment, as well as the environmental protection pressure of the implementation of the new standard. The membrane integrated process independently developed by Tianchuang carries out hierarchical separation treatment for the comprehensive discharge water of electroplating, thus effectively improving the economy of traditional wastewater treatment technology, not only completely eliminating the low concentration of harmful substances in wastewater, Satisfy the most
Published on: February 15, 2020 Number of hits: 247
-
The surface condition and production and processing regulations of electroplating equipment process, select a moderate number of processes, carry out necessary trimming and production processing on the surface of parts, so that the parts have a flat and smooth surface, which is the key step to obtain high-quality coating. In process treatment before plating
Published on: February 12, 2020 Clicks: 270
-
With the rapid economic development, environmental problems are also a very serious problem, so we can not just focus on economic development and ignore the problem of environmental damage. Previously, we did not know much about the problems brought about by industrial development, but since the emergence of haze, acid rain and other problems, we
Published on: December 7, 2018 Number of hits: 414
-
The electroplating automatic production line is a modern equipment that works continuously in strict accordance with the pre established work procedures, process flow and time requirements. It runs fast and stably, with high output and stable quality, but it is not as random as the manual line, so it is difficult to change. Decision making due to high investment
Published on: 2018-12-07 Number of hits: 418
-
Everyone knows that management brings benefits. How to create a high-quality, efficient and low-cost electroplating processing system? The price of electroplating equipment is what every electroplating processing enterprise hopes to achieve. In order to achieve this, we must strengthen our own quality through hard work. As far as the electroplating processing site is concerned, it must have "perfect management system" and "standard operation method".
Published on: 2018-12-07 Number of hits: 479
-
The quality of electroplating solution is an important factor affecting the coating thickness, and the judgment of its quality is multifaceted: 1. Dispersion ability: when other conditions are the same, the better the dispersion ability, the more uniform the coating thickness distribution; 2. Deep plating ability: deep plating ability refers to the ability of the plating solution to deposit coatings on the deep recesses of complex parts, also known as coating
Published on: December 7, 2018 Clicks: 405
-
Electroplating equipment has changed the simple cleaning method in the past and adopted a new cleaning method - ultrasonic cleaning. With ultrasonic cleaning, electroplating equipment can be cleaned quickly and efficiently. The cleaning temperature shall be determined by test according to the residual amount of oil stain, cleanliness requirements, cleaning method and drying method of electroplating parts
Published on: December 7, 2018 Number of hits: 239
-
1. The raw materials must be fully dried according to the process requirements, without moisture, or there will be craze on the surface after injection molding. 2. The injection temperature, pressure, time, etc. meet the requirements of the process parameter card, and the injection speed should be strictly controlled. Too fast injection speed will lead to poor adhesion between the coating and the substrate (the injection speed of plated parts should be controlled at 15% - 3
Published on: December 7, 2018 Clicks: 193
-
1. Leveling ability: Leveling ability (i.e. micro dispersion ability) refers to the ability of the plating solution to make the micro profile of the coating smoother than the substrate surface when the coating is formed on the metal surface. It indicates that the roughness of the base metal is relatively small, the depth of the wave cavity is less than 0.5mm, and the distance between the wave crest and the wave trough is very small
Published on: December 7, 2018 Clicks: 202
-
Electroplating equipment is to carry out necessary trimming and processing on the surface of parts to make them have a smooth and clean surface. This is an important link to obtain high-quality coating. So this link needs some auxiliary equipment to complete. What equipment are there? 1. The plating tank must be equipped with accessories including anode and anode
Published on: December 7, 2018 Clicks: 139
-
During nickel plating, the cathode is the part to be plated and the anode is a pure nickel plate. The following reactions occur at the cathode and anode respectively: cathode (plated part): Ni2++2e → Ni (main reaction); 2H++2e → H2 ↑ (side reaction); Anode (nickel plate): Ni-2e → Ni2+(main reaction); 4O
Published on: December 7, 2018 Number of hits: 153
-
Pretreatment refers to the electrocleaning and activation treatment of the surface of the plated object to improve the bonding strength between the coating and the object. The electroplating solution to be used in this link is surface treatment solution, mainly including electrocleaning solution and activation solution. The electrocleaning solution is a colorless transparent alkaline aqueous solution with a pH of 13, which can grow
Published on: December 7, 2018 Number of hits: 166
