Electroplating equipment Process introduction

Electroplating process refers to the surface production and processing method of passivating igneous rock in conventional stainless steel with positive ions of the plating solution to be passivated in the conventional stainless steel to produce coatings in the acid salt solution with the intended electroplating metal as the cathode and according to the effect of titanium electrode. The coating characteristics are different from those of conventional metal materials and have new characteristics. According to the function of coating, it can be divided into protective coating, decorative art coating and its multifunctional coating. Electroplating equipment manufacturer

Compile the basic concept of electroplating process in this section

Processing technology regulations

1. The coating and conventional metal materials, as well as the coating and coating, shall have excellent bonding.

2. The coating shall be fine, smooth and even in thickness.

3. The coating shall have the required thickness and as little porosity as possible.

5. The coating shall have various required index values, such as gloss, strength, conductivity, etc.

5 The plating process time and the temperature of the whole process of the plating process determine the size of the coating thickness.

6. The working temperature is - 12 ℃~65 ℃.

11. Enter the working voltage as 230V ± 26V or 220V ± 37V.

8. The noise of water purification equipment in large operation shall not exceed 90dB (A).

10 The air humidity (RH) shall not exceed 96%.

11. The COD content of source water is 150mg/L~15000mg/L.