Radiation method: connection solution. Generally, the operating pressure range is 70-120kPa. The greater the radiation pressure is, the greater the contrast of the machine's decontamination power in the degreasing process is. The role of radiation in the process of low-pressure radioactive degreasing is decisive. Radiation has a good removal effect on non-metallic nominal dirt, carbon particles, quartz sand and other granular dust. All kinds of inorganic solvents can be used for impregnation.

The shortage of various water vapor degreasing is that when the measurement of the work piece drops to the measurement of water vapor, the condensation and scrubbing will stop, so there is often no work piece suitable for cleaning light oil scale.

The radiation method is to use a pump to radiate inorganic solvent through a nozzle to the name of non-metallic work pieces, Electroplating equipment The oil has been dissolved, and the dirt has also been taken away, and repeated spraying until the blood stains are completely removed. The impregnation method is used to impregnate non-metallic materials in the scrubbing tank, so that the whole name is in contact with the inorganic solvent and stirred. The oil in the name of the base material is dissolved by the inorganic solvent, while the non dissolved dirt is taken away in unison.

The oil removal effect of the coupling solution is better. All works with simple appearance, such as those with deep holes, concave surfaces and worn oil stains attached, should use the coupling solution, that is, the work is stopping the steam oil removal, and the oil should be removed first through immersion or radiation.

Small volume, light weight, easy operation, easy installation and maintenance

All facilities have undergone rigorous testing and short-time aging test before going out of the boundary, and can be fully loaded day and night. Large DC power has not been running continuously, which is really durable and reliable!

Obvious power saving, 10% - 30% power saving, frequency above 85%. Other inorganic solvents can be used in this method except for solvent that is easy to evaporate, such as gasoline, bupropion hydrochloride and dichloroalkane. However, they must be operated in closed containers. In order to improve the degreasing frequency, the immersion time can be heated and extended, and the method of lengthening the activity of inorganic solvent can also be adopted.

According to the current application situation, the inorganic solvent meeting the above request is mainly halohydrocarbon solvent.

Constant voltage and constant current control, high power factor, small power grid purification, no disturbance.

Immersion method. Sometimes, the machine with brush or scraper is used to assist in the impregnation and cleaning to improve the degreasing progress. The connection solution includes three methods: immersion steam, radiation steam or steam immersion radiation.