Electroplating equipment How important are the four major aspects of maintenance?

Today, automation equipment is used by more and more enterprises. Early automatic production lines mainly rely on imports. With the continuous development of domestic automation technology, the electroplating production line has become more and more automated, and its operation is more stable and reliable. According to statistics, at present, more than 90% of the automatic electroplating production lines in China are localized, and the domestic automatic production lines also have a place in the global market.

In addition, our electroplating equipment should always pay attention to the use of equipment. Do not leave the post without authorization during operation. Electroplating machines of various specifications should always be vigilant, especially for abnormal conditions. Once abnormal conditions are found during the operation of the equipment, the power supply of the equipment shall be cut off immediately, and personnel shall be required to carry out maintenance before use. Electroplating equipment is an important condition for electroplating enterprises to produce, and enterprises must invest in certain production. The investment capital is used to purchase various electroplating equipment. However, after idle or long-term use, electroplating equipment will be worn to varying degrees. New equipment is expensive. Frequently purchasing new equipment to solve the problem of wear and tear will bring considerable economic pressure to enterprises.

However, the selection of our electroplating equipment is very important to ensure the quality of electroplating products and improve production efficiency, such as hanging plating production line, ring plating line, gantry plating line and barrel plating automatic production line, single arm plating production line and supporting auxiliary equipment, such as rectifier, filter freezer Ultrasonic cleaning machine and automatic additive adding machine.

As for electroplating equipment, two types of electroplating equipment are mainly used, one is horizontal electroplating line, the other is vertical electroplating line. Electroplating equipment is an important condition for the production of electroplating enterprises. Industrial production requires a certain amount of investment. The investment funds used to purchase various electroplating equipment will cause a certain degree of wear and tear after being idle or used for a long time.

Therefore, the maintenance of electroplating equipment is very important:

1. Repair and maintenance of the rack. Regularly check whether the stainless steel surface is deformed, whether the mounting screws are loose, lacking and worn, and clean the dust on the surface to ensure the cleanness of the rack.

2. Repair and maintenance of crane. Check whether the machine can operate normally and whether there is unusual noise. The brake performance should be adjusted regularly. The tightness of the bearing seat and the lubrication condition of the bearing need to be tightened immediately if they are loose. On the contrary, an appropriate amount of grease is required.

3. Repair and maintenance of swing mechanism. Check the fastening of the reducer base after a certain period of time. If the vibration is weak, it needs to be replaced immediately in case of serious wear.

4. Repair and maintenance of circulating filtration system. In order to ensure the flow of the filter, the filter element of the filter is often cleaned or replaced.