Electroplating equipment Is it efficient? What is the daily maintenance method?

Electroplating equipment can plate multiple workpieces at the same time. In addition, stirring the liquid medium in the electroplating process can accelerate the workpiece electroplating, extract the liquid medium from the electroplating box to filter impurities, always adhere to the purity and quality of electroplating, greatly improve the electroplating efficiency, and improve the rapid electroplating equipment. Including electroplating box, impurity filter and agitator, the electroplating box is placed on the frame, the upper end is placed with the electroplating box cover, and the contact is sealed. The upper end of the electroplating box cover is provided with several negative poles and electroplating workpieces, and the lower end of the negative pole and electroplating workpieces extends into the electroplating box.

The electroplating box is filled with liquid medium for electroplating, the lower end of the negative pole and the electroplating workpiece is immersed in the liquid, the lower end of the electroplating box is provided with a row of agitators, the blades of the agitator are partially in the liquid medium, and the drive is partially fixed on the rack. One end of the electroplating box is provided with a liquid suction pipe, the connection between the electroplating box and the liquid suction pipe is provided with a one-way valve, the other end of the liquid suction pipe is connected to the lower end of the impurity filter screen, the upper end of the impurity filter screen is connected to the liquid extraction pump, the output end of the liquid extraction pump is connected to the electroplating box through the drainage pipe, and the impurity filter screen and the liquid extraction pump are placed on the pump support, The pump support is fixed on the outer side of the electroplating box.

What are the methods for daily maintenance of electroplating equipment?

1. Electroplating equipment repair and rack maintenance. Regularly check if the stainless steel surface is modified, check whether any loose mounting screws pass and wear is lost to ensure a clean surface dust removal framework.

2. Repair and maintenance of crane. It is recommended to check whether the working machine can operate normally and generate some abnormal noise. The performance of braking system shall be regularly analyzed and debugged. The tightness of the bearing seat and the lubrication management of the bearing need to be tightened in time. On the contrary, an appropriate amount of grease needs to be added.

3. Repair and maintenance of swing mechanism. Check the fastening and vibration of the reducer base at regular intervals, which will seriously affect the wear., It needs to be replaced immediately.

In order to ensure the flow of the filter during the maintenance of the circulating filter system, the filter is often used to replace the filter.