-
Characteristics of electroplating wastewater treatment equipment: the components of electroplating wastewater treatment equipment are complex, and the key elements are heavy metal ions such as chromium, cadmium, nickel, copper, zinc, gold, silver, and hydrogen cyanide. With heavy metals exceeding the standard, the adverse effects are very large. If the environmental protection standards are not met, the daily life and
Published on: August 12, 2020 Clicks: 57
-
Do you know the principle of electroplating wastewater treatment equipment? The principle of diluent loosening method: exhaust the odorous gas into the air through the chimney, or use odorless gas diluent to reduce the concentration of odorous substances to reduce the odor. Scope of application: It is applicable to solve the odor gas with medium and low concentration discharged by institutions. Advantages: low cost, simple machinery and equipment. Defect: vulnerable to meteorological elements
Published on: August 8, 2020 Number of hits: 106
-
Electroplating wastewater treatment equipment has its own characteristics, small footprint and easy integration. It not only has daily wastewater treatment, but also can be used for large-scale wastewater treatment. As a key production equipment, the integrated electroplating wastewater treatment equipment is cost-effective. Select improved A/O+filtering technology and configure excellent intelligence
Published on: July 27, 2020 Number of hits: 167
-
What are the zero discharge treatment equipment and technology for electroplating wastewater? Wastewater in China mainly includes steel, pharmaceutical, food processing, petrochemical industry, printing and dyeing, power plant, electronic devices and other industries. The completion of zero discharge of industrial wastewater can reduce the pressure of environmental protection to a certain extent. 1、 The characteristic of zero discharge of electroplating wastewater is that
Published on: July 13, 2020 Number of hits: 108
-
The electroplating equipment manufacturer explains the electroplating methods for you. 1. The last method of brush plating is called "brush plating": it is an electrodeposition technology, and not all parts are immersed in the electrolyte during the electroplating process. In this electroplating technology, only a limited area is electroplated, and there is no impact on the rest&
Published on: June 10, 2020 Clicks: 190
-
What is the application scope of electroplating wastewater treatment equipment? In recent years, with the continuous improvement of environmental protection industry, electroplating wastewater treatment equipment has achieved a certain degree of rapid development. Technical transformation shall be carried out for major sewage treatment equipment manufacturing enterprises to improve their production capacity and manufacturing level. The production level of special equipment for urban sewage treatment and supporting general equipment has been greatly improved, and there will be
Published on: May 26, 2020 Clicks: 113
-
The principle and characteristics of zero discharge of electroplating wastewater is what the working principle of zero discharge system of electroplating wastewater is: the zero discharge system of electroplating wastewater mainly uses the membrane separation technology, because the membrane separation technology has the advantages of low energy consumption, no phase change, no pollution, high separation efficiency, high concentration times, and suitable membrane separation is selected to concentrate the rinsing water of electroplating solution, The concentration ratio can reach 100 times (
Published on: May 19, 2020 Clicks: 98
-
What are the necessary auxiliary equipment of electroplating equipment? If you want to complete the electroplating process according to the process requirements, it is not enough to have power supply and plating tank. There must also be some auxiliary equipment to ensure the normal production of electroplating. Including heating or cooling equipment, cathode moving or stirring equipment, plating solution circulation or filtering equipment and the necessary accessories of the plating tank, such as electrode rod, electrode wire, anode and anode basket, and electroplating hanger
Published on: May 11, 2020 Number of hits: 99
-
Why should electroplating equipment be degreased? Under the electrolytic condition of the electroplating equipment of the electroplating equipment manufacturer, the electrochemical degreasing not only has the saponification and emulsification of chemical degreasing, but also has the electrochemical effect. The polarization of the electrode reduces the interfacial tension between the oil and solution, and the wettability of the solution on the part surface increases, reducing the adhesion between the oil film and the metal, making the oil stain easy to peel off and disperse to the solution
Published on: April 28, 2020 Clicks: 81
-
What are the requirements for maintenance management of electroplating wastewater treatment equipment? This procedure is formulated to strengthen the equipment management, process management and water quality management of wastewater treatment, ensure the safe and normal operation of wastewater treatment, achieve the purpose of purifying water quality, treating and disposing sludge, and protecting the environment. The operation, maintenance and safety of sewage treatment shall not only comply with this specification, but also comply with the regulations of the current national standards
Published on: April 24, 2020 Clicks: 132
-
Inspection requirements for electroplating equipment and basic requirements for daily spot inspection of electroplating equipment on how to treat wastewater: therefore, the independent spot inspection system of electroplating equipment manufacturers should not be too cumbersome and time-consuming, and the technical content should not be too high. 1) Requirements for daily inspection personnel of electroplating equipment. 2) Record the spot check results in the spot check table. Be familiar with routine check specifications and contents. 3) The lubricating parts shall be inspected according to the requirements of the spot inspection table
Published on: April 18, 2020 Number of hits: 115
-
Whether you know the technology of magnetron sputtering coating of electroplating equipment magnetron sputtering coating equipment is a vacuum coating machine with simple structure, good stability of electrical control and other advantages. The selection of its technology has a very important impact on the performance of the film. Today we will talk about magnetron sputtering coating technology
Published on: April 9, 2020 Number of hits: 104
-
How to use electroplating equipment to deal with waste gas and waste gas in an environmentally friendly way. The electroplating equipment manufacturer said that the above is some correct practices when operating the waste gas treatment equipment. Only in this way can the efficiency of waste gas treatment be guaranteed& nbs
Published on: April 1, 2020 Number of hits: 76
-
Current electroplating wastewater treatment methods include physical and chemical method, biological treatment method, ion exchange method, electrolysis method, etc. The above methods are characterized by high cost, complex operation and difficult treatment of a large number of harmful pollutants with low concentration. According to the statistics and investigation of the current treatment situation of electroplating wastewater in China
Published on: March 26, 2020 Clicks: 94
-
Electroplating equipment Electroplating production mode and daily inspection requirements Electroplating equipment Electroplating production mode Electroplating equipment should have sufficient room for sustainable development from the aspects of reasonable energy structure, resource saving and reuse. Electroplating production units are not only making decisions from the perspective of electroplating process and environmental protection
Published on: March 17, 2020 Clicks: 91
-
Electroplating conditions of electroplating equipment: 1. There should be good adhesion between the coating and the base metal, between the coating and the coating; 2. The coating shall be crystal, smooth and even in thickness; 3. The coating shall have the specified thickness and as few pores as possible; 4. The coating shall have specified indicators, such as
Published on: March 12, 2020 Number of hits: 165
-
The electroplating wastewater treatment equipment aims at the problems of large amount of comprehensive discharge water in the electroplating industry, low concentration of harmful substances and difficult treatment, as well as the environmental protection pressure of the implementation of the new standard. The membrane integrated process independently developed by Tianchuang carries out hierarchical separation treatment for the comprehensive discharge water of electroplating, thus effectively improving the economy of traditional wastewater treatment technology, not only completely eliminating the low concentration of harmful substances in wastewater, Satisfy the most
Published on: February 15, 2020 Number of hits: 248
-
The surface condition and production and processing regulations of electroplating equipment process, select a moderate number of processes, carry out necessary trimming and production processing on the surface of parts, so that the parts have a flat and smooth surface, which is the key step to obtain high-quality coating. In process treatment before plating
Published on: February 12, 2020 Clicks: 270
-
What key links must be paid attention to in electroplating equipment of management plan? The management plan of electroplating equipment is the basis for the production and manufacturing of electroplating enterprises. The purpose of the management plan of electroplating equipment is to use machinery and equipment more effectively and economically, and make full use of the best economic benefits
Published on: February 4, 2020 Number of hits: 111
-
Common problems in electroplating equipment 1. Pitting. The pitting is due to the dirty workpiece. The plating solution is dirty. It is characterized by convexity, no brightness and no fixed shape. 2. Pinhole. The pinhole is due to the hydrogen adsorbed on the surface of the plated part, which is not released for a long time. When the bath is short of wetting agent and the current density is high, pinholes are easily formed.
Published on: January 17, 2020 Number of hits: 87
211 in total
20 entries per page
Page: 6/11
