上海约茶-阿拉上海后花园论坛-上海龙凤1314-上海阿拉后花园

What is the maintenance process of the paint booth?

After use every day, the walls, glass and platform base in the room should be cleaned to avoid the accumulation of dust and paint dust. Clean the air inlet dust screen every week, and insist on whether there is dust accumulation on the exhaust dust screen. If the air pressure in the Suzhou paint booth rises for no reason, replace the exhaust dust screen
Published on: December 7, 2018 Clicks: 151

How to manage electroplating equipment production line to reduce damage?

With the rapid economic development, environmental problems are also a very serious problem, so we can not just focus on economic development and ignore the problem of environmental damage. Previously, we did not know much about the problems brought about by industrial development, but since the emergence of haze, acid rain and other problems, we
Published on: December 7, 2018 Number of hits: 414

What is automatic electroplating production line, and what are the advantages and disadvantages of automatic electroplating production line?

The electroplating automatic production line is a modern equipment that works continuously in strict accordance with the pre established work procedures, process flow and time requirements. It runs fast and stably, with high output and stable quality, but it is not as random as the manual line, so it is difficult to change. Decision making due to high investment
Published on: 2018-12-07 Number of hits: 418

Only in this way can electroplating equipment manufacturers produce more benefits

Everyone knows that management brings benefits. How to create a high-quality, efficient and low-cost electroplating processing system? The price of electroplating equipment is what every electroplating processing enterprise hopes to achieve. In order to achieve this, we must strengthen our own quality through hard work. As far as the electroplating processing site is concerned, it must have "perfect management system" and "standard operation method".
Published on: 2018-12-07 Number of hits: 479

How to make the coating more uniform?

The quality of electroplating solution is an important factor affecting the coating thickness, and the judgment of its quality is multifaceted: 1. Dispersion ability: when other conditions are the same, the better the dispersion ability, the more uniform the coating thickness distribution; 2. Deep plating ability: deep plating ability refers to the ability of the plating solution to deposit coatings on the deep recesses of complex parts, also known as coating
Published on: December 7, 2018 Clicks: 405

How to improve the cleaning method of electroplating equipment?

Electroplating equipment has changed the simple cleaning method in the past and adopted a new cleaning method - ultrasonic cleaning. With ultrasonic cleaning, electroplating equipment can be cleaned quickly and efficiently. The cleaning temperature shall be determined by test according to the residual amount of oil stain, cleanliness requirements, cleaning method and drying method of electroplating parts
Published on: December 7, 2018 Number of hits: 239

High quality requirements for injection molded parts for electroplating

1. The raw materials must be fully dried according to the process requirements, without moisture, or there will be craze on the surface after injection molding. 2. The injection temperature, pressure, time, etc. meet the requirements of the process parameter card, and the injection speed should be strictly controlled. Too fast injection speed will lead to poor adhesion between the coating and the substrate (the injection speed of plated parts should be controlled at 15% - 3
Published on: December 7, 2018 Clicks: 193

What are the capabilities of electroplating technology?

1. Leveling ability: Leveling ability (i.e. micro dispersion ability) refers to the ability of the plating solution to make the micro profile of the coating smoother than the substrate surface when the coating is formed on the metal surface. It indicates that the roughness of the base metal is relatively small, the depth of the wave cavity is less than 0.5mm, and the distance between the wave crest and the wave trough is very small
Published on: December 7, 2018 Clicks: 202

What other auxiliary equipment are needed to complete electroplating processing

Electroplating equipment is to carry out necessary trimming and processing on the surface of parts to make them have a smooth and clean surface. This is an important link to obtain high-quality coating. So this link needs some auxiliary equipment to complete. What equipment are there? 1. The plating tank must be equipped with accessories including anode and anode
Published on: December 7, 2018 Clicks: 139

Summary of electroplating knowledge in electroplating equipment

During nickel plating, the cathode is the part to be plated and the anode is a pure nickel plate. The following reactions occur at the cathode and anode respectively: cathode (plated part): Ni2++2e → Ni (main reaction); 2H++2e → H2 ↑ (side reaction); Anode (nickel plate): Ni-2e → Ni2+(main reaction); 4O
Published on: December 7, 2018 Clicks: 154

The Role of Electroplating Solution in Pretreatment

Pretreatment refers to the electrocleaning and activation treatment of the surface of the plated object to improve the bonding strength between the coating and the object. The electroplating solution to be used in this link is surface treatment solution, mainly including electrocleaning solution and activation solution. The electrocleaning solution is a colorless transparent alkaline aqueous solution with a pH of 13, which can grow
Published on: December 7, 2018 Number of hits: 166

211 in total 20 entries per page Page: 11/11

上海约茶


Access mobile station	WeChat official account